3–15
Before Driving
Doors and Locks
To unlock
To unlock the doors and the liftgate/boot
lid, press the request switch on a front
door and the hazard warning lights will
À
ash twice.
(Except European models)
A beep sound will be heard twice.
NOTE
Con
¿
rm that all doors and the
liftgate/boot lid are securely locked.
For the liftgate/boot lid, move it
without pressing the electric liftgate/
boot lid opener to verify that the
liftgate/boot lid has not been left ajar.
All doors and the liftgate/boot lid
cannot be locked when any door is
open.
It may require a few seconds for
the doors to unlock after the request
switch is pressed.
(European models)
The setting can be changed so that a
beep sound is heard for con
¿
rmation
when the doors and the liftgate/
boot lid are locked/unlocked using a
request switch.
(Except European models)
A beep sound is heard for
con
¿
rmation when the doors and the
liftgate/boot lid are locked/unlocked
using the request switch. If you
prefer, the beep sound can be turned
off.
The volume of the beep sound
can also be changed. Refer to
Personalisation Features on page
9-13 .
NOTE
Use the following procedure to
change the setting.
1. Switch the ignition off and close
all of the doors and the liftgate/
boot lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer.
All of the doors and the liftgate/
boot lid lock and the beep sound
activates at the currently set
volume. The setting changes each
time the LOCK button on the key
is pressed and the beep sound
activates at the set volume. (If the
beep sound has been set to not
activate, it will not activate.)
4. The setting change is completed
by doing any one of the following:
Switching the ignition to ACC
or ON.
Closing the driver's door.
Opening the liftgate/boot lid.
Not operating the key for 10
seconds.
Pressing any button except the
LOCK button on the key.
Pressing a request switch.
(With theft-deterrent system)
The hazard warning lights
À
ash when
the theft-deterrent system is armed or
turned off.
Refer to Theft-Deterrent System
(With the Intrusion Sensor) on page
3-52 .
Refer to Theft-Deterrent System
(Without the Intrusion Sensor) on
page 3-56 .
/C\FCA(-''(A'FKVKQPKPFD
/C\FCA(-''(A'FKVKQPKPFD
Summary of Contents for Mazda 6
