Mazda Mazda 6 Owner'S Manual Download Page 728

Page: 728 / 762

8–20

Customer Information

Electromagnetic Compatibility

Your Mazda has been tested and certi

ed to the UNECE

10 regulation as related to

electromagnetic compatibility. Radio Frequency (RF) transmitter equipment (e.g. cellular
telephones, amateur radio transmitters, etc.) may only be

tted to your Mazda if they

comply with the parameters shown in the table below.

*1 UNECE stands for United Nations Economic Commission for Europe.

It is your responsibility to ensure that any equipment you have

tted complies with

applicable local legislations. Have any equipment

tted by properly trained technicians.

CAUTION

Do not mount any transceiver, microphones, speakers, or any other item in the

deployment path of the air bag system.

Do not fasten aerial lead to original vehicle wiring, fuel pipes or brake pipes. Avoid

running the aerial lead parallel with the wire harness to the best extent possible.

Keep the aerial and power leads at least 100 mm (3.9 in) from any electronic modules

and the air bags.

Avoid using the cigar lighter or accessory socket as a power source for the RF-

transmitting equipment.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands