Mazda Mazda 6 Owner'S Manual Download Page 389

Page: 389 / 762

4–235

When Driving

Rear View Monitor

NOTE

The displayable range varies depending on the vehicle and road conditions.

The displayable range is limited. Objects under the bumper or around the bumper ends

cannot be displayed.

The distance appearing in the displayed image is different from the actual distance

because the rear view parking camera is equipped with a speci

c lens.

Images displayed on the monitor from the rear view parking camera are reversed

images (mirror images).

Some optionally installed vehicle accessories may be picked up by the camera. Do not

install any optional parts that can interfere with the camera view, such as illuminating
parts or parts made of re

ective material.

It may be dif

cult to see the display under the following conditions, however, it does

not indicate a malfunction.

In darkened areas.

When the temperature around the lens is high/low.

When the camera is wet such as on a rainy day or during periods of high humidity.

When foreign material such as mud is stuck around the camera.

When the camera lens re

ects sunlight or headlight beams.

Image display may be delayed if the temperature around the camera is low.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands