Mazda Mazda 6 Owner'S Manual Download Page 658

Page: 658 / 762

7–10

If Trouble Arises

Flat Tyre

*Some models.

Emergency Flat Tyre
Repair Kit

The emergency

at tyre repair kit included

with your Mazda is for a temporary repair
of a slightly damaged

at tyre resulting

from running over nails or similar sharp
objects on the road surface.
Perform the emergency

at tyre repair

without removing the nail or similar sharp
object which punctured the tyre.

NOTE

Your vehicle is not equipped with a
spare tyre. In the event of a

at tyre,

use the emergency

at tyre repair kit

to repair the tyre temporarily. When
doing the repair, refer to the instructions
included in the emergency

at tyre

repair kit. If an emergency repair was
performed on a

at tyre using the

emergency

at tyre repair kit, have

an expert repairer, we recommend an
Authorised Mazda Repairer, repair or
replace the tyre as soon as possible.

About the Emergency Flat Tyre

Repair Kit

The emergency

at tyre repair kit includes

the following items.

Tyre sealant

Injection hose

Compressor

Valve core
tool

Spare valve
core

Speed restriction
sticker

Instructions

WARNING

Do not allow children to touch the tyre
sealant:

Ingestion of tyre sealant is

dangerous. In the event tyre sealant
is accidentally swallowed, drink
large amounts of water immediately
and seek medical assistance.

Tyre sealant that comes into contact

with the eyes and skin is dangerous.
If tyre sealant enters the eyes or
contacts the skin,

ush immediately

with large amounts of water and
seek medical assistance.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands