Mazda Mazda 6 Owner'S Manual Download Page 539

Page: 539 / 762

5–131

Interior Features

Bluetooth

NOTE

Some Bluetooth

audio devices need a

certain amount of time before the “ ”
symbol is displayed.

3. Press the media button (

) to

switch to the Bluetooth

audio mode

and start playback.

If the current device version is lower
than AVRCP Ver. 1.3:

“ BT Audio ” is

displayed.

If the current device is AVRCP Ver. 1.3:

The playback time is displayed.

NOTE

If the Bluetooth

audio device does

not begin playback, press the Play/
Pause button (4).

If a call is received on a hands-free

mobile phone during playback from
the Bluetooth

audio device, the

playback is stopped. Playback from
the Bluetooth

audio device resumes

after the call ends.

Playback

1. To listen to a Bluetooth

audio device

over the vehicle's speaker system,
switch the mode to Bluetooth

audio mode. (Refer to “Switching to
Bluetooth

audio mode”)

2. To stop playback, press the Play/Pause

button (4).

3. Press the button again to resume

playback.

Selecting a

le (track)

Selects the next

le (track)

Short-press the track up button ( ).

Selects the beginning of the current

(track)

Short-press the track down button ( ).

Fast-forward/Reverse (AVRCP Ver. 1.3)

Fast-forward

Press and hold the fast-forward
button ( ).

Reverse

Press and hold the reverse down button
( ).

Switching the display (only AVRCP Ver.
1.3)

The information displayed on the audio
display changes as follows each time the
text button ( 3 ) is pressed during playback.

Button

Information displayed

on audio display

Elapsed time
Album name

Song name

Artist name

NOTE

If title information is not available,

“ NO TITLE ” is displayed.

This unit cannot display some

characters. Characters which cannot
be displayed are indicated by an
asterisk ( ).

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands