Mazda Mazda 6 Owner'S Manual Download Page 510

Page: 510 / 762

5–102

Interior Features

Bluetooth

Voice Recognition (Type A)

In this section, the basic operation of the
voice recognition is explained.

Activating Voice Recognition

To Activate the Main Menu: Press the
pick-up button or talk button with a short
press.

Ending Voice Recognition

Use one of the following methods:

Press and hold the talk-button.

Press the hang-up button.

Skipping Voice Guidance (for faster
operation)

Press and release the talk-button.

NOTE

The Bluetooth

Hands-Free system

is operable several seconds after the
ignition is switched to ACC or ON
(requires less than 15 seconds).

When operating the audio unit or

the A/C while using Bluetooth

Hands-Free, the beep sounds or voice
guidance (audio unit)/cannot be
heard.

Tutorial

The tutorial explains how to use
Bluetooth

Hands-Free.

To activate the tutorial, do the following:

1. Press the pick-up button or talk button

with a short press.

Say:

[Beep] “Tutorial”

3. Follow the prompts to receive the

appropriate voice guidance instructions.

Commands useable anytime during
voice recognition

“Help” or “Go Back” are commands
which can be used at anytime during voice
recognition.

Help function use

The help function informs the user of all
the available voice commands under the
current conditions.

Say:

[Beep] “Help”

2. Follow the prompts to receive the

appropriate voice guidance instructions.

Returning to previous operation

This command is for returning to the
previous operation while in the voice
recognition mode.

Say:

[Beep] “Go Back”

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands