Mazda Mazda 6 Owner'S Manual Download Page 213

Page: 213 / 762

4–59

When Driving

Automatic Transaxle

Shift-Lock System

The  shift-lock  system  prevents  shifting  out
of P unless the brake pedal is depressed.

  To shift from P:

   1.   Depress and hold the brake pedal.
2.   Start  the  engine.
   3.   Press and hold the lock-release button.
4.   Move  the  selector  lever.

NOTE

When the ignition is switched to

ACC or the ignition is switched off,
the selector lever cannot be shifted
from P.

The ignition cannot be switched to

OFF if the selector lever is not in P.

Shift-Lock Override

If the selector lever will not move from P
using the proper shift procedure, continue
to hold down the brake pedal.

Type A

1. Remove the shift-lock override cover

using a cloth-wrapped

at head

screwdriver.

2. Insert a screwdriver and push it down.

Cover

3. Press and hold the lock-release button.
4. Move the selector lever.

Take the vehicle to an expert repairer, we
recommend an Authorised Mazda Repairer
to have the system checked.

Type B

1. Press the lock-release button with the

button pressed.

Lock-release button

Button

2. Move the selector lever.

Take the vehicle to an expert repairer, we
recommend an Authorised Mazda Repairer
to have the system checked.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands