Mazda Mazda 6 Owner'S Manual Download Page 688

Page: 688 / 762

7–40

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Signal

Warning

4WD Warning

Indication

“4WD system malfunction” is displayed

The indication is displayed under the following conditions. The system may have a

malfunction. Have the vehicle checked at an expert repairer, we recommend an Authorised

Mazda Repairer.

When there is a malfunction in the 4WD system.

When there is a large difference between the tyre size of the front and rear wheels.

“ 4WD system high-load” is displayed

The indication is displayed under the following conditions. Park the vehicle in a safe place

and check that the warning indication light turns off, and then drive the vehicle. Contact

an expert repairer, we recommend an Authorised Mazda Repairer if the indication is

continuously displayed.

When the differential oil temperature is excessively high.

When there is a large difference between the front and rear wheel rotation, such as when

trying to remove the vehicle from mud.

4WD Warning

Light

When the light is turned on

The light turns on under the following conditions. The system may have a malfunction.

Have the vehicle checked at an expert repairer, we recommend an Authorised Mazda

Repairer.

When there is a malfunction in the 4WD system.

When there is a large difference between the tyre size of the front and rear wheels.

When the light is

ashing

Park the vehicle in a safe place. After a few moments, if the warning light stops

ashing,

you can resume driving. If the light does not stop

ashing, contact an expert repairer, we

recommend an Authorised Mazda Repairer.

When the differential oil temperature is excessively high.

When there is a large difference between the front and rear wheel rotation, such as when

trying to remove the vehicle from mud.

(Illuminate)

TCS/DSC Indicator

Light

If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and

they may not operate correctly. Take your vehicle to an expert repairer, we recommend an

Authorised Mazda Repairer.

Air Bag/Seat Belt

Pretensioner System

Warning Light

A system malfunction is indicated if the warning light constantly

ashes, constantly

illuminates or does not illuminate at all when the ignition is switched ON. If any of these

occur, consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as

possible. The system may not operate in an accident.

WARNING

Never tamper with the air bag/pretensioner systems and always have an expert

repairer, we recommend an Authorised Mazda Repairer perform all servicing and

repairs:
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner

could accidentally activate or become disabled causing serious injury or death.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands