Mazda Mazda 6 Owner'S Manual Download Page 489

Page: 489 / 762

5–81

Interior Features

Audio System

Playback

1. Select the icon on the home screen to display the Entertainment screen.
2. Select

to switch the USB mode. The following icons are displayed in the

lower part of the centre display.

Icon

Function

Displays the Entertainment menu. Use to switch to a different audio source.

Category list is displayed.

Current track list is displayed.

Select a desired track to play it.

Plays the current track repeatedly.

Select it again to play the tracks in the current track list repeatedly.

When selected again, the function is cancelled.

Tracks in the current track list are played randomly.

Select it again to cancel.

Starts playing a track similar to the current track using Gracenote's More Like This

™

Select the desired song from the category list to cancel More Like This

™

If selected within a few seconds from the beginning of a song which has started to play, the

previous song is selected.

If more than a few seconds have elapsed, the song currently being played is replayed from

the beginning.

Long-press to fast reverse. It stops when you remove your hand from the icon or the

commander knob.

Track is played. When selected again, playback is temporarily stopped.

Advances to the beginning of the next song.

Long-press to fast forward.

Displays sound settings to adjust audio quality level.

Refer to Volume/Display/Sound Controls on page 5-46 .

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands