Mazda Mazda 6 Owner'S Manual Download Page 372

Page: 372 / 762

4–218

When Driving

i-ACTIVSENSE

NOTE

Under the following conditions, the radar sensor (front) may not be able to detect

vehicles ahead or obstructions correctly and each system may not operate normally.

The rear surface of a vehicle ahead does not re

ect radio waves effectively, such as

an unloaded trailer or an automobile with a loading platform covered by a soft top,
vehicles with a hard plastic tailgate, and round-shaped vehicles.

Vehicles ahead with low vehicle height and thus less area for re

ecting radio waves.

Visibility is reduced due to a vehicle ahead casting off water, snow, or sand from its

tyres and onto your windscreen.

The luggage compartment is loaded with heavy objects or the rear passenger seats

are occupied.

Ice, snow, or soiling is on the front surface of the front emblem.

During inclement weather such as rain, snow, or sand storms.

When driving near facilities or objects emitting strong radio waves.

Under the following conditions, the radar sensor (front) may not be able to detect

vehicles ahead or obstructions.

The beginning and end of a curve.

Roads with continuous curves.

Narrow lane roads due to road construction or lane closures.

The vehicle ahead enters the radar sensor's blind spot.

The vehicle ahead is running abnormally due to accident or vehicle damage.

Roads with repeated up and down slopes

Driving on poor roads or unpaved roads.

The distance between your vehicle and the vehicle ahead is extremely short.

A vehicle suddenly comes close such as by cutting into the lane.

To prevent incorrect operation of the system, use tyres of the same speci

ed size,

manufacturer, brand, and tread pattern on all four wheels. In addition, do not use
tyres with signi

cantly different wear patterns or tyre pressures on the same vehicle

(Including the temporary spare tyre).

If the battery power is weak, the system may not operate correctly.

When driving on roads with little traf

c and few vehicles ahead or obstructions for

the radar sensor (front) to detect, “Front radar blocked” may be temporarily displayed,
however, this does not indicate a problem.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands