Mazda Mazda 6 Owner'S Manual Download Page 683

Page: 683 / 762

7–35

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

Signal

Warning

Electronic Brake Force

Distribution System

Warning

If the electronic brake force distribution control unit determines that some components

are operating incorrectly, the control unit may illuminate the brake system warning

light and the ABS warning light simultaneously. The problem is likely to be the

electronic brake force distribution system.

WARNING

Do not drive with both the ABS warning light and brake warning light

illuminated. Have the vehicle towed to an expert repairer, we recommend an

Authorised Mazda Repairer to have the brakes inspected as soon as possible:
Driving when the brake system warning light and ABS warning light are

illuminated simultaneously is dangerous.
When both lights are illuminated, the rear wheels could lock more quickly in an

emergency stop than under normal circumstances.

Charging System

Warning Indication/

Warning Light

If the warning light illuminates while driving, it indicates a malfunction of the

alternator or of the charging system.

Drive to the side of the road and park off the right-of-way. Consult an expert repairer,

we recommend an Authorised Mazda Repairer.

CAUTION

Do not continue driving when the charging system warning light is illuminated

because the engine could stop unexpectedly.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands