Mazda Mazda 6 Owner'S Manual Download Page 383

Page: 383 / 762

4–229

When Driving

Tyre Pressure Monitoring System

NOTE

Because this system detects slight changes in tyre conditions, the timing of the warning
may be faster or slower in the following cases:

The size, manufacturer, or the type of tyres is different from the speci

cation.

The size, manufacturer, or the type of a tyre is different from the others, or the level of

tyre wear is excessively different between them.

A run-

at tyre, studless tyre, snow tyre, or tyre chains are used.

An emergency tyre is used (The tyre pressure monitoring system warning light may

ash and then continue illuminating).

A tyre is repaired using the emergency

at tyre repair kit.

The tyre pressure is excessively higher than the speci

ed pressure, or the tyre pressure

is suddenly lowered for some reason such as a tyre burst during driving.

The vehicle speed is lower than about 15 km/h (9.3 mph) (including when the vehicle

is stopped), or the drive period is shorter than 5 minutes.

The vehicle is driven on an extremely rough road or a slippery, icy road.

Hard steering and rapid acceleration/deceleration are repeated such as during

aggressive driving on a winding road.

Load on the vehicle is applied to a tyre such as by loading heavy luggage to one side of

the vehicle.

System initialization has not been implemented with the speci

ed tyre pressure.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands