Mazda Mazda 6 Owner'S Manual Download Page 583

Page: 583 / 762

6–15

Maintenance and Care

Scheduled Maintenance

*5 Also inspect the air conditioner drive belts, if installed.

If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often than

the recommended intervals.

a) Driving in dusty conditions

b) Extended periods of idling or low speed operation

c) Driving for long period in cold temperatures or driving regularly at short distance only

d) Driving in extremely hot conditions

e) Driving in mountainous conditions continually

*6 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may

cause serious damage to the engine and cooling system.

*7 If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air

lter more often

than the recommended intervals.

*8 Inspect the battery electrolyte level, speci

c gravity and outer appearance. If the vehicle is operated in extremely

hot and cold areas, inspect the battery electrolyte level, speci

c gravity and appearance every 10,000 km (6,250

miles) or 6 months. The sealed battery only requires an outer appearance inspection.

*9 If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is

operated in extremely humid climates, replace the brake

uid annually.

*10 If the vehicle is operated primarily under any of the following conditions, replace the rear differential oil at

every 45,000 km (27,000 miles).

a) Towing a trailer or using a car-top carrier

b) Driving in dusty, sandy or wet condition

c) Extended periods of idling or low speed operation

d) Repeated short trips of less than 16 km (10 miles)

*11 If this component has been submerged in water, the oil should be replaced.

*12 The Tyre Pressure Monitoring System (TPMS) initialization must be performed so that the system operates

normally (if equipped).

*13 Check the tyre repair

uid expiration date every year when performing the periodic maintenance. Replace the

tyre repair

uid bottle with new one before the expiration date.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands