Mazda Mazda 6 Owner'S Manual Download Page 692

Page: 692 / 762

7–44

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Signal

Warning

(Amber)

Lane-keep Assist

System (LAS) &

Lane Departure

Warning System

(LDWS) Warning

Indication

The message is displayed when the system has a malfunction. Have your vehicle inspected

at an expert repairer, we recommend an Authorised Mazda Repairer.

The system does not operate when the warning message is displayed.

CAUTION

Always use tyres for all wheels that are of the speci

ed size, and the same

manufacture, brand, and tread pattern. In addition, do not use tyres with signi

cantly

different wear patterns on the same vehicle. If such improper tyres are used, the

system may not operate normally.

When an emergency spare tyre is used, the system may not operate normally.

NOTE

If the windscreen area in front of the Forward Sensing Camera (FSC) is fogged or

obstructed, the light turns on temporarily. If the light remains turned on, there may be a

problem with the system.

(Amber)

Driver Attention

Alert (DAA)

Warning Indication

The message is displayed when the system has a malfunction. Have your vehicle inspected

at an expert repairer, we recommend an Authorised Mazda Repairer.

LED Headlight

Warning Light

This light illuminates if there is a malfunction in the LED headlight. Have your vehicle

inspected by an expert repairer, we recommend an Authorised Mazda Repairer.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands