Mazda Mazda 6 Owner'S Manual Download Page 559

Page: 559 / 762

5–151

Interior Features

Interior Equipment

*Some models.

Illuminated Entry System

When the illuminated entry system
operates, the overhead lights, the courtesy
lights, and an ambient light

turn on in the

following conditions:

The driver's door is unlocked after the

ignition is switched OFF.

The ignition is switched OFF with all

doors closed.

NOTE

(Overhead lights)

The illuminated entry system

operates when the overhead light
switch is in the DOOR position.

The illumination time differs

depending on the operation.

Battery saver

If an interior light is left on with

the ignition switched OFF, the light
is turned off automatically after
about 30 minutes to prevent battery
depletion.

The operation of the illuminated

entry system can be changed.

Refer to Personalisation Features on

page 9-13 .

Accessory Sockets

Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
The ignition must be switched to ACC or
ON.

Front

Centre

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands