Mazda Mazda 6 Owner'S Manual Download Page 199

Page: 199 / 762

4–45

When Driving

Instrument Cluster and Display

Navigation Guidance (vehicles with navigation system)

Speed limit indicator (vehicles with navigation system)

Vehicle Speed

Each setting/adjustment for the active driving display can be performed on the centre
display.

1. Select the

icon on the home screen and display the Settings screen.

2. Select the AD-Disp tab.
3. Select the desired item and perform the setting/adjustment.

Method for adjusting screen brightness (automatically/manually)

Screen brightness initial settings (automatic adjustment is selected)

Screen brightness adjustment (manual adjustment is selected)

Display position of active driving display (display height)

Active driving display angle adjustment (display angle correction)

The combination of street name display, lane guidance, and turn by turn (TBT) can be

changed. (navigation guidance)

Active driving display ON/OFF (indication)

Reset settings (reset)

NOTE

The desired driving position (display position, brightness level, display information)

can be called up after programming the position.

Refer to Driving Position Memory on page 2-9 .

The street name may not be displayed depending on the market and region.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands