Mazda Mazda 6 Owner'S Manual Download Page 695

Page: 695 / 762

7–47

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Signal

Warning

Action to be taken

Seat Belt Warning Light (Front

seat)

The seat belt warning light turns on

if the driver or front passenger's seat

is occupied and the seat belt is not

fastened with the ignition switched ON.

If the driver or front passenger's seat

belt is unfastened (only when the

front passenger's seat is occupied)

and the vehicle is driven at a speed

faster than about 20 km/h (12 mph),

the warning light

ashes. After a short

time, the warning light stops

ashing,

but remains illuminated. If a seat belt

remains unfastened, the warning light

ashes again for a given period of time.

NOTE

If the driver or front passenger's

seat belt is unfastened after the

warning light turns on, and the

vehicle speed exceeds 20 km/h (12

mph), the warning light

ashes

again.

Placing heavy items on the front

passenger's seat may cause the

front passenger's seat belt warning

function to operate depending on

the weight of the item.

To allow the front passenger

seat weight sensor to function

properly, do not place and sit on

an additional seat cushion on the

front passenger's seat. The sensor

may not function properly because

the additional seat cushion could

cause sensor interference.

If a small child is seated on the

front passenger's seat, the warning

light may not operate.

Fasten the seat belts.

(Red)

Seat Belt Warning Light (Rear

seat)

If the rear seat belts are not fastened

while the ignition is switched ON , the

driver and the passenger are alerted by

the warning light.

The warning light operates even if

there is no passenger on the rear seat.

NOTE

If a rear seat belt is not fastened

by a certain period of time after

the engine has been started, the

warning light turns off.

Fasten the seat belts.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands