Mazda Mazda 6 Owner'S Manual Download Page 351

Page: 351 / 762

4–197

When Driving

i-ACTIVSENSE

NOTE

The Smart City Brake Support [Forward] (SCBS F) system will operate under the

following conditions.

The engine is running.

The Smart Brake Support/Smart City Brake Support (SBS/SCBS) system warning

indication/warning light (amber) does not illuminate.

(Rear-end collision warning)

The vehicle speed is about 4 to 80 km/h (2 to 50 mph).

(Brake control (SCBS brake))

The vehicle speed is about 4 to 30 km/h (2 to 18 mph).

The Smart City Brake Support [Forward] (SCBS F) system is not turned off.

Under the following conditions, the Smart City Brake Support [Forward] (SCBS F)

system may not operate normally:

The Smart City Brake Support [Forward] (SCBS F) system will not operate if the

driver is deliberately performing driving operations (accelerator pedal and steering
wheel).

If there is the possibility of partial contact with a vehicle ahead.

The vehicle is driven on a slippery road surface such as wet roads or icy or snow-

bound roads.

The braking performance is adversely affected due to cold temperatures or wet brakes.

The vehicle is driven at the same speed as the vehicle ahead.

The accelerator pedal is depressed.

The brake pedal is depressed.

The steering wheel is being operated.

The selector lever is being operated.

In the following cases, the Forward Sensing Camera (FSC) determines that there is a

vehicle ahead and the Smart City Brake Support [Forward] (SCBS F) may operate.

Objects on the road at the entrance to a curve.

Vehicles passing in the opposite lane while making a curve.

Metal objects, bumps, or protruding objects on the road.

When passing through a toll gate.

When passing through low gates, narrow gates, car washing machines, or tunnels.

If you suddenly come close to a vehicle ahead.

2-wheeled vehicles, pedestrians, animals or standing trees.

Vehicle is driven with some of the tyres having signi

cant wear.

(Manual transaxle)

If the vehicle is stopped by the SCBS operation and the clutch pedal is not depressed,

the engine stops.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands