Mazda Mazda 6, Owner'S Manual

Page: 282 / 762

4–128
When Driving
i-ACTIVSENSE
Vehicle lane display (vehicles with
multi-information display)
The vehicle lane lines (stand-by) are
indicated in the multi-information display
when the LDWS goes on standby.
When the LDWS detects white (yellow)
lines on both the left and right sides and
becomes operational, the vehicle lane
lines (stand-by) are indicated in the multi-
information display.
Auto cancel
In the following cases, the LDWS cancels
automatically and the LDWS OFF
indicator light in the instrument cluster
turns on.
The temperature inside the camera is
high or low.
The windscreen around the camera is
foggy.
The windscreen around the camera is
blocked by an obstruction, causing poor
forward visibility.
Vehicle lane display (vehicles with
multi-information display)
The vehicle lane lines (stand-by) are
indicated in the multi-information
display when the LDWS is automatically
cancelled.
Auto cancel warning
When the following operations are
performed, the LDWS determines that
the driver intends to make a lane change
and the LDWS warning is cancelled
automatically. The LDWS is enabled
automatically after the driver performs the
operation.
The steering wheel is operated abruptly.
The brake pedal is depressed abruptly.
The accelerator pedal is depressed
abruptly.
The direction indicator lever is operated
(after the direction indicator lever is
returned, the LDWS may not operate for
about 3 seconds which is the period of
time required to make a lane correction).
NOTE
After about 30seconds have elapsed
with the direction indicator lever left
operating, the LDWS warning may
operate if the vehicle is close to a white
or yellow line.
Cancelling the System
Press the LDWS OFF switch to cancel the
LDWS. The LDWS OFF indicator light
turns on.
Vehicle lane display (vehicles with
multi-information display)
The vehicle lane lines are no longer
indicated in the multi-information display
when the LDWS is cancelled.
/C\FCA(-''(A'FKVKQPKPFD /C\FCA(-''(A'FKVKQPKPFD