Mazda Mazda 6 Owner'S Manual Download Page 548

Page: 548 / 762

5–140

Interior Features

Bluetooth

Example of use (Location Based
Services)

1. Select the desired station from the

“Nearby” tab on the main menu.

The destination name or address

playback starts in the order of the
destination name list.

2. When the

icon is selected, the

currently displayed destination is
displayed on the navigation system
(vehicles with navigation system).

3. When the icon is selected, a phone

call is placed to the currently displayed
destination.

4. Select the

icon to display the

content list.

Selection of other destinations from the

list can be made.

Shout

Some social stations, such as Facebook or
Caraoke, support the ability to record and
share voice messages using the “Shout”
function.

1. Select the icon and start the

countdown (3, 2, 1, 0). Recording starts
when the countdown reaches zero.

2. Records voice.
3. Select

and store/post the

recording.

NOTE

Recordable time varies depending on

the station (Max. 30 seconds).

Recording stops automatically when

the recordable time has elapsed. You
can then post or delete the recording.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands