Mazda Mazda 6 Owner'S Manual Download Page 659

Page: 659 / 762

7–11

If Trouble Arises

Flat Tyre

NOTE

The tyre sealant cannot be reused.

Purchase new tyre sealant at an
Authorised Mazda Repairer.

The emergency

at tyre repair kit

cannot be used in the following
cases.

Consult an expert repairer, we

recommend an Authorised Mazda
Repairer.

The period of effective use for

the tyre sealant has expired. (The
period of effectiveness is indicated
on the bottle label.)

The tear or puncture exceeds about

4 mm (0.16 in).

The damage has occurred to an

area of the tyre other than the
tread.

The vehicle has been driven with

nearly no air remaining in the tyre.

The tyre has come off the wheel

rim.

Damage to the wheel rim has

occurred.

The tyre has two or more

punctures.

Using the Emergency Flat Tyre

Repair Kit

1. Park on a level surface off the right-of-

way and set the parking brake.

2. Put a vehicle with an automatic

transaxle in Park (P), a manual
transaxle in Reverse (R) or 1, and turn
off the engine.

3. Turn on the hazard warning

asher.

4. Unload passengers and luggage, and

remove the emergency

at tyre repair

kit.

Saloon

Wagon

5. Shake the tyre sealant well.

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands