Mazda Mazda 6 Owner'S Manual Download Page 358

Page: 358 / 762

4–204

When Driving

i-ACTIVSENSE

NOTE

In the following cases, an ultrasonic sensor (rear) may detect something as a target

obstruction which could cause the Smart City Brake Support [Reverse] (SCBS R)
system to operate.

Driving on a steep slope.

Wheel blocks.

Hanging curtains, gate poles such as at toll gates and railroad crossing.

When travelling near objects such as foliage, barriers, vehicles, walls, and fences

along a road.

When driving off-road in areas where there is grass and forage.

When passing through low gates, narrow gates, car washing machines, and tunnels.

A towing bar is installed or a trailer is connected.

(Manual transaxle)

If the vehicle is stopped by the SCBS operation and the clutch pedal is not depressed,

the engine stops.

When the system operates, the user is noti

ed by the multi-information display or the

active driving display.

The Smart City Brake Support (SCBS) warning indication (amber) turns on when the

system has a malfunction.

Refer to Warning Indication/Warning Lights on page 4-47 .

/C\FCA(-''(A'FKVKQPKPFD

Summary of Contents for Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands

Mazda Mazda 6, Owner'S Manual

Search results

Summary of Contents for Mazda 6

Reviews:

Related manuals for Mazda 6

Brands by name

Popular brands