Maytag MLE20PDAYW0, Service Manual

Page: 15 / 204

2-1
inSTallaTiOn reQuireMenTS
For complete installation instructions
See Links to documents page.
Tools and parts
Gather the required tools and parts before
starting installation. The parts supplied are in
the washer spin basket.
Tools needed for connecting water inlet hoses:
Pliers (that open to 1 9/16” [39.5 mm])
Flashlight (optional)
Tools needed for installation:
8” or 10” pipe wrench
8” or 10” adjustable wrench that opens to 1”
Flat blade screwdriver
Star blade screwdriver
T-20 security screwdriver
1” hex head socket or wrench
5/16” socket or wrench
Pliers that open to 1 9/16”
Level
Utility knife
1/4” nut driver
Locking pliers
Caulk gun and caulk (if installing new vent)
Vent clamps
Pipe-joint compound suitable for gas type
27” wood block
1/2” and 9/16” open-end wrenches
Ruler or measuring tape
Flashlight (optional)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
E. Beaded tie strap
F. Drain hose
G. Hose clamp
Parts supplied:
D E G
A B
C
F