Maytag MLE20PDAYW0, Service Manual

Page: 177 / 204

6-11
WaSHer HelP CODeS Dryer HelP CODeS
Help
Code
(Hex) Description
OF Oversuds detected during cycle, and washer was not able to resolve
an unbalance condition detected during the final spin related to the
oversuds detection (via pressure sensor) earlier in the cycle.
32 More than 4 unbalance retries during the final spin. Cycle has
been canceled.
33 Oversuds detected during wash cycle, and washer was not able to
resolve the condition – cycle has been aborted. Washer unable to
sense that water has been fully drained within required time, sensing
as an oversuds condition. F21 or F35 received from washer.
71 Generation 2 debit card cycle polling message out of sequence.
74 Generation 2 debit card remaining balance message out of sequence.
75 Generation 2 debit card new card balance message out of sequence.
88 Invalid messaging state found in data acquisition (DA) communication
comm_suprv ( ) routine.
Help Codes
Display
Indication Step
1 1h.XX Help Code 1, where XX is the help code
number. *
2 2h.XX Help Code 2, where XX is the help code
number. *
3 3h.XX Help Code 3, where XX is the help code
number. *
4 1.X## Error history code 1, where X is the F or d
code, and ## is the code number. **
5 2.X## Error history code 2, where X is the F or d
code, and ## is the code number. **
6 3.X## Error history code 3, where X is the F or d
code, and ## is the code number. **
7 4.X## Error history code 4, where X is the F or d
code, and ## is the code number. **
8 SC.XX CCU software revision, where XX is the
software revision number.
9 SU.XX UI software revision, where XX is the
software number.
10 UI EEPROM revision, where XX is the
EEPROM number. EU .XX
Help Mode Submenu
Explanation
* To erase the 3 help codes, press DELICATES button.
** The Errors displayed in this section are the history errors that have occurred in the dryer (not
necessarily an error that is in progress). The current error is displayed in the MANUAL KEY
FUNCTION IN DIAGNOSTIC SUB-MODE.
Code
Help Codes
Description
Help
71
74
75
88 Generation 2 debit card cycle polling message out of sequence
Generation 2 debit card remaining balance message out of sequence
Generation 2 debit card new card balance message out of sequence
Invalid messaging state found in da communications comm_suprv ( ) routine