Maytag MLE20PDAYW0, Service Manual

Page: 102 / 204

4-46
Remove three T-20 screws from the washer
front support bracket that secure the top
and front of the chemical dispenser.
Remove two 1/4” hex head screws from
the top edge of the left and right ends that
secure the front support bracket to the side
panels.
Lift the bracket and remove it from the
washer.
7.
8.
9.
Unplug washer or disconnect power.
Turn off the water supply to the washer.
Remove dryer from stack (See page 4-11).
Remove the UIC transformer
(See page 4-44).
Remove the two 1/4” hex head screws that
secure the plastic strips with locator pegs on
the top edge of each side panel.
Remove the front clip, in a slot, on the top of
the front support bracket.
1.
2.
3.
4.
5.
6.
reMOve WaSHer FrOnT SuPPOrT BraCkeT
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Front Clip
Two 1/4”
Screws
Three T-20
Screws
Two 1/4”
Screws