ENGLISH
USE AND MAINTENANCE
pag.72
Cod. F07022163
11.3_MAINTENANCE WORK
All the operations described below
must
be done at the beginning and end of each season.
When doing maintenance work always respect the regulations contained in the chapter
“9_Maintenance and
adjustment”.
OPERATIONS TO BE DONE
DAYS
MONTHS
BALE
Check the state of wear and the integrity of the tractor connecting elements and
of the structural elements.
1
Check the condition of the supports, bearings, pins and shafts.
7
Check the tension of the chains.
3
Check the bearings of the roll-holder and the bushings of the spring bearing
bars of the reel-holder.
7
Check the cams and the collection tines of the pick-up.
1
Check the pressure of the tyres.
1
Check that the jacks, hydraulic tubes and fittings do not have any oil leaks.
7
Check the oil level in the deviation box.
1
1000
Check the oil filter of the automatic oiling system.
12
Check that the electrical light system works for road transport.
1
Check the cables.
6
Check if bolts and screws are correctly tightened.
1
Check the welds.
12
Check the condition of the adhesive safety signs (pictograms).
1
Check the condition of all the protection guards and safety measures.
1
Check tension of the slat conveyor chain.
6
Check that the regulation of the disengagement is correct.
6
Grease and lubricate in accordance with the times described in the table
“11.2_Lubrication operations”.
At the beginning and end of each season always give your round baler a complete and thorough cleaning.
