ENGLISH
USE AND MAINTENANCE
pag.36
Cod. F07022163
7.4.3_CONNECTION OF THE HYDRAULIC SYSTEM
Connect the hydraulic tubes:
The small tube is connected to a single-acting
distributor.
The two large tubes are connected to a double-
acting distributor.
The small tube for hydraulic raising of the pick-
up is provided with a stop valve.
Before lifting the pick-up:
Position the stop valve lever in the
"OPEN"
position and then lift it (transport position).
Finally turn the lever of the valve to the
"CLOSED"
position to block it.
7.4.4_ATTACHMENT OF THE CARDAN SHAFT
The cardan shaft is a transmission device (machine), having "CE" certification.
Each cardan shaft is provided with a user manual; follow and respect all the information and safety rules for
using the cardan shaft contained in this manual scrupulously.
Mount the cardan shaft, provided with the machine,
between the power take-off of the tractor and the
transmission box of the machine; the connection of
the cardan shaft on the tractor side is indicated on
the cardan shaft itself.
Make sure that the length never exceeds the
minimum distance between the machine and the
tractor (cambering hazard), while at the greatest
distance the two tubes must insert one into the other
by at least 1/3 of their length.
Check that the safety buttons or screws are inserted well into the grooves of the power take-off and
check that the guard rotates freely; if this is not the case apply grease.
Fix the chain to prevent self-rotation of itself and the guard.
For further information on the use and maintenance of the cardan shaft read the special instruction booklet
provided with it.
WARNING! After all maintenance work on the cardan shaft replace the protective covers on the
cardan shaft.
1/3
1/3
1/3
1/3
CLOSED
OPEN
