USE AND MAINTENANCE
ENGLISH
Cod. F07022163
pag.49
9_MAINTENANCE AND ADJUSTMENT
9.1_ROUTINE MAINTENANCE
IMPORTANT! Regular careful maintenance lengthens the life of your machine and guarantees
your personal safety.
All the screwed/bolted assemblies must be tightened according to the values contained in the table
“11.4_Torque settings”
, unless stated otherwise.
FOR THIS MACHINE THE VALUE "8.8" REPRESENTS THE STANDARD AND THE MINIMUM
QUALITY USED.
Diameter and torque wrench settings for the quality of the materials according to DIN ISO 898.
The lubrication of any machine with rotating and rubbing parts is of great importance for the duration and
working order of the machine. Lubrication should therefore be done regularly and systematically
“11.4_Torque
settings”
, unless stated otherwise.
WARNING! Before doing any maintenance on the machine:
Keep in mind all the basic safety rules contained in the chapter
“4_General safety
regulations”.
Do maintenance work only with the machine off and all the moving parts
completely still:
Always turn off the tractor and remove the keys from the dashboard.
Always switch off the “FF Control” system.
Never raise the machine from the ground.
Prearrange maintenance work for which the due dates are known.
This manual is of a purely informative nature. The periods between maintenance operations are for normal
working conditions of the round baler therefore if the round baler is used in more severe conditions it is logical
to increase the frequency of maintenance.
Replace any damaged parts:
ALWAYS USE ORIGINAL SPARE PARTS.
WARNING!: If it is necessary to do maintenance with the tailgate open, or inside the bale
formation chamber itself, lock the tailgate in position using the tailgate safety lock following
the instructions shown in paragraph
“4.5.9_Tailgate safety lock device”.
Do the maintenance work exactly as indicated in this manual and have any worn or
damaged parts replaced by specialised personnel.
