Maschio ENTRY 120, Use And Maintenance

Page: 69 / 88

USE AND MAINTENANCE
ENGLISH
Cod. F07022163 pag.67
9.19_STORAGE
IMPORTANT!

If these operations are carefully done you will have the benefit of a machine in excellent
condition that is ready to resume work.

If the machine is to be scrapped, respect the laws in force regarding pollution and the
disposal of lubricants in your country.
9.19.1_STORAGE OF THE MACHINE
At the end of the season, or if a long period of rest is foreseen, the following instructions should be followed:

Make sure that the machine is completely unloaded.

Release the pressure in the hydraulic circuit.

Store the machine in a closed area under surveillance in order to prevent the entry of unauthorised
persons.

Keep the machine in a dry place, protected from adverse weather conditions and on a suitable flat surface.
To avoid sudden unwanted movements of the machine, place wedges under the wheels.

Make sure that all the guards on the machine are in their correct positions.

Thoroughly clean the machine, dirt attracts humidity and as a result the metallic parts can rust.

Inspect everything carefully and if necessary replace any damaged or worn parts.

Carefully lubricate all the required points, apply antirust or oil or grease to all the metallic
parts not covered with paint or with paint peeled off to protect from rust.

Oil the blades of the binders, clean and oil all the chains.

Grease all the exposed parts of the cylinder rods and electrical actuators.

Clean the belts and check the condition of the clinches (fasteners).

Cover the baler with a plastic sheet.
9.19.2_STORAGE OF THE “FF Control” SYSTEM

Remove the control terminal.

Keep them in a dry place protected from inclement weather, dust, humidity, insects and rodents.
9.19.3_STORAGE OF THE CARDAN SHAFT

Remove the cardan shaft and place it in a dry protected place.
For further information read the instruction and maintenance booklet of the cardan shaft provided together with
it.
9.19.4_STORAGE OF THE TWINE - NET
The twine spools and the net rolls must be removed from the machine and stored in their respective boxes in a
dry protected place.
Keep these boxes in a place protected from the possible attack of rodents.
IMPORTANT!
Handle the twine spools and the net rolls with care so as not to cause injury.