ENGLISH
USE AND MAINTENANCE
pag.48
Cod. F07022163
8.5_PARKING
CAUTION! Before taking the machine back to its storage area make sure that there is no bale
still loaded.
At the end of work deposit the machine in a suitable flat area to avoid sudden accidental movements.
Place the parking chocks under the wheels.
Lower the parking jack to the ground and raise the machine by 2÷3 cm from its connection to the tractor in
order to unhook it.
Raise the cardan shaft support; detach the cardan shaft from the tractor and rest it on the support; secure
it with the chain.
Depressurise the hydraulic circuit and rest the wheels of the pick-up on the ground; move the lever of the
valve to the
“CLOSED”
position and disconnect the tubes of the hydraulic system.
Disconnect the electrical power cables of the lighting system and wind them around the support rods.
Disconnect the signal line of the “FF Control” system and wind it around the support rods.
Then remove the control terminal and replace it in a location protected from dust and weather conditions.
Remove the safety pin and the hook-up pin from the towing eye of the
drawbar and then unhook the tractor from the machine.
Finally drive the tractor away from your round baler.
