USE AND MAINTENANCE
ENGLISH
Cod. F07022163
pag.43
7.6.4_ADJUSTING THE PICK-UP WHEELS
The working position of the pick-up can be adjusted
by setting the supporting side wheels in one of the
preset positions equally on both sides.
Adjusting the operating height of the pick-up:
To raise or lower the height of the pick-up change
the position of the pins
"S"
, located on the wheel
arm, by inserting them into one of the holes located
on the support structure, according to the work
needs.
To raise or lower the pick-up:
Use the lever of the tractor selector remembering to open the stop valve located
near the quick release fitting (position
"OPEN”
).
OPEN
WARNING!
The tines of the pick-up must never touch the ground; therefore adjust the working height
of the pick-up so that the tines remain at least 2-3cm above the ground.
Insert the pin "S" in the same position on both left and right sides of the pick-up.
7.6.5_RAKE
Check the height of the front conveying rake
against the bands of the pick-up.
Position the rake in the lower hole “min”
when picking up damp product and in small
swathes.
Position the rake in the top hole “max” when
picking up dry product and in voluminous
swathes.
S
min
max
