ENGLISH
USE AND MAINTENANCE
pag.12
Cod. F07022163
4.2_SAFETY WARNINGS
Before putting the machine into operation:
Make sure that you have a perfect knowledge of the controls and their functions.
Conduct a regular check of the perfect condition of the entire machine: all the safety and protection
devices.
All the accident prevention protection guards must be mounted and fixed in accordance with the
manufacturer's instructions and must not be tampered with.
WARNING! It is absolutely forbidden for the round baler to be used by persons who have not
read and assimilated the contents of this manual.
4.2.1_WARNINGS TO THE INDIVIDUAL
Pay attention to the danger symbols shown in this manual and on the machine itself; the adhesive danger
signs must always be clearly visible.
Make sure that they are always kept clean and replace them if they have deteriorated or are difficult to read.
You will find the position and the list of all the danger signs in the paragraph
“4.4_Adhesive Safety signs”
.
WARNING!
CAUTION!
Never leave the machine unattended during work.
Never leave the tractor unattended with its engine running.
Do not allow the machine to be used by minors or persons who are not competent, or not in good
health or who do not have a valid driving license.
The radius of action of the machine is to be considered a
dangerous area
: before
putting the machine into operation make sure that there are no persons or animals
around the work area, otherwise stop the machine and clear the area.
The person using the round baler is liable towards third parties for any damage caused
by the machine inside the radius of action.
During operation of the machine it is absolutely forbidden to approach the mechanical parts, touch the
moving parts or interpose oneself between them.
Keep your face, hands and feet away from moving parts; stay at a safe distance.
Do not stand behind the machine, the tailgate may be open and the bale may be
ejected.
WARNING!
Make sure that the tailgate is closed, visually checking that the pointer of the
pressure gauge is between the yellow sector and the green sector indicating a
pressure between 80
130 bar
CAUTION!
Before working on the net wrapper or the area of the tying
devices, position the safety lock (stop) to avoid crushing or
amputation of the hands.
Load the twine or net wrap with the tractor engine off and after
cutting off the current to the control system “FF Control”.
For further information on twine or net loading, read chapter
“7.6_Setting up the machine for work”
.
