MARUTI SUZUKI S-Cross Owner'S Manual Download Page 220

Page: 220 / 348

5-77

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

iPod

operations

TUNE

VOL -

VOL +

FLD

TUNE

MODE

SOUND

FLD

ENT

SEEK

TRACK

SEEK

TRACK

RPT

RDM

MENU

DISP

While displaying iPod

menu, press to select the

desired item and display the list. When a track is
selected from the list, the playback starts.

ENT button

The random mode switches as follows:

RDM (5) button

OFF

SONG RANDOM

ALBUM RANDOM

Press to play the current track repeatedly.
Press it again to cancel.

RPT (4) button

The display switches as follows:

Press it for 1 second or longer to display the next
page.

DISP (6) button

Playlist name /
Track title (Playlist mode only)

Artist name / Track title

Album name / Track title

Track title / Play time

During playback
• Press to display iPod

menu.

• Press it for 1 second or longer to display the top menu.
While iPod

menu is displayed

• Press to display the folder in one layer upper.
• Press it for 1 second or longer to display the top menu.

MENU button

While displaying iPod

menu, press to display

the next/previous list in the same layer.

TUNE FOLDER UP/DOWN button

Press to skip to the next/previous file.
Press it for 1 second or longer to fast-forward/fast-
rewind the file.

SEEK TRACK UP/DOWN button

Summary of Contents for S-Cross





























































































































































































































































































































































Search results

Summary of Contents for S-Cross

Reviews:

Related manuals for S-Cross

Brands by name

Popular brands

MARUTI SUZUKI S-Cross, Owner'S Manual

Search results

Summary of Contents for S-Cross

Reviews:

Related manuals for S-Cross

Brands by name

Popular brands