manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 236 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 236

7-9

INSPECTION AND MAINTENANCE

64MS0-74E

Engine Coolant

Selection of Coolant

To maintain optimum performance and
durability of your engine, use MARUTI
Genuine Coolant or equivalent.

This type of coolant is the best for cooling
system for the following reasons:
• The coolant helps to maintain proper

engine temperature.

• It gives proper protection against freez-

ing and boiling.

• It gives proper protection against corro-

sion and rust.

Failure to use the proper coolant can dam-
age your cooling system. An authorised
Maruti Suzuki workshop can help you
select the proper coolant.

NOTICE

• When replacing the oil filter, it is

recommended that you use a MAR-
UTI genuine replacement filter. If
you use an after market filter, make
sure it is of equivalent quality and
follow the manufacturer’s instruc-
tions.

• Oil leakage from periphery of the

oil filter or drain plug indicate
incorrect installation or gasket
damage. If you find any leakage or
are not sure that the filter has been
properly tightened, have the vehi-
cle inspected by your authorised
Maruti Suzuki workshop.

NOTICE

To avoid damaging your cooling sys-
tem:
• Always use a high quality ethylene

glycol base non-silicate type cool-
ant diluted with distilled water at
the correct mixture concentration.

• Make sure that the proper mix is 50/

50 coolant to distilled water and in
no case higher than 70/30. Concen-
trations greater than 70/30 coolant
to distilled water will cause over-
heating conditions.

• Do not use straight coolant nor

plain water.

• Do not add extra inhibitors or addi-

tives. They may not be compatible
with your cooling system.

• Do not mix different types of base

coolants. Doing so may result in
accelerated seal wear and/or the
possibility of severe overheating
and extensive engine damage.

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments