manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 258 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 258

7-31

INSPECTION AND MAINTENANCE

64MS0-74E

Wiper Blades

64MM07019

If the wiper blades become brittle or dam-
aged, or make streaks when wiping,
replace the wiper blades.

To install new wiper blades, follow the pro-
cedures below.

NOTE:
Some wiper blades may be different from
the ones described here depending on
vehicle specifications. If so, consult your
authorised Maruti Suzuki workshop for
proper replacement method.

For windshield wipers:

64MM07020

1) Hold the wiper arm away from the wind-

shield.

NOTE:
When raising both of the front wiper arms,
pull the driver’s side wiper arm up first.
When returning the wiper arms, lower the
passenger’s side wiper arm first.
Otherwise, the wiper arms may interfere
with each other.

68PH00750

2) Squeeze lock (1) towards wiper arm (2)

and remove the wiper frame from the
arm as shown.

3) Unlock the lock end of the wiper blade

and slide the blade out as shown.

NOTICE

To avoid scratching or breaking the
windshield, do not let the wiper arm
strike the windshield while replacing
the wiper blade.

EXAMPLE

EXAMPLE

(2)

(2)

(1)

(1)

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments