MARUTI SUZUKI S-Cross Owner'S Manual Download Page 191

Page: 191 / 348

5-48

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

Selecting a USB device mode

Press the USB button (1).

Selecting a folder

Turn the TUNE FOLDER PUSH SOUND
knob (2) to select the desired folder.

Selecting a track

• Press the Up button (3) to listen to the

next track.

• Press the Down button (4) twice to listen

to the previous track.
When the Down button (4) is pressed
once, the track currently being played
will start from the beginning again.

Fast forwarding/Rewinding a track

• Hold down the Up button (3) to fast for-

ward the track.

• Hold down the Down button (4) to fast

rewind the track.

Random playback

Press the RDM button (6).
Each time the button is pressed, the mode
will change as follows:

• FOLDER RANDOM

The random indicator “F.RDM” will light.
The tracks in the currently selected
folder will be played in random order.

• ALL RANDOM

The random indicator “RDM” will light.
The tracks in the connected USB device
will be played in random order.

Repeat playback

Press the RPT button (5).
Each time the button is pressed, the mode
will change as follows:

• FILE REPEAT

The repeat indicator “RPT” will light.
The track currently being played will be
played repeatedly.

• FOLDER REPEAT

The repeat indicator “F.RPT” will light.
All the tracks in the folder currently
selected will be played repeatedly.

Display change

Press the DISP button (7).
Each time the button is pressed, display
will change as follows:

NOTE:
• “NO TITLE” will be displayed when there

is no text information in the disc currently
being played.

• If text data contains more than 12 char-

acters, the “>” mark will appear at the
right end. Holding down the DISP button
(7) for 1 second or longer can display the
next page.

OFF FOLDER RANDOM ALL RANDOM

OFF FILE REPEAT

FOLDER REPEAT

Play time

Folder name

File name

Album name (MP3, AAC only)

Track title

Artist name

Summary of Contents for S-Cross





























































































































































































































































































































































Search results

Summary of Contents for S-Cross

Reviews:

Related manuals for S-Cross

Brands by name

Popular brands

MARUTI SUZUKI S-Cross, Owner'S Manual

Search results

Summary of Contents for S-Cross

Reviews:

Related manuals for S-Cross

Brands by name

Popular brands