manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 42 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 42

2-23

BEFORE DRIVING

64MS0-74E

Seatback angle adjustment lever (1) 
(if equipped)

Pull the lever up and move the seatback.
After adjustment, try to move the seatback
forward and rearward to ensure that it is
securely latched.

Head Restraints

Head restraints are designed to help
reduce the risk of neck injuries in the case
of an accident.

NOTE:
It may be necessary to fold forward the
seatback to provide enough overhead
clearance to remove the head restraint.

Adjust the head restraint to the position
which places the center of the head
restraint closest to the top of your ears. If
this is not possible for very tall passengers,
adjust the head restraint as high as possi-
ble.

Rear

64MS156

To raise the rear head restraint, pull
upward on the restraint until it clicks. To
lower the restraint, push down the restraint
while holding in the lock lever. If a head
restraint must be removed (for cleaning,
replacement, etc.), push in the lock lever
and pull the head restraint all the way out.

When installing a child restraint system,
raise the head restraint to the most upper
position.

Folding Rear Seat (s)

The rear seat (s) of your vehicle can be
folded forward to provide additional cargo
space.

To fold the rear seat (s) forward:
1) Lower the head restraint fully.

64MS157

2) Pull the release lever on the top of each

split seat, and fold the seatback (s) for-
ward.

CAUTION

After securing the rear seatback,
make sure that it is locked securely. If
it is not, red will appear beside the
lever.

WARNING

• Never drive the vehicle with the

head restraints removed.

• Do not attempt to adjust the head

restraint while driving.

EXAMPLE

NOTICE

After folding the rear seatback for-
ward, do not allow any foreign mate-
rial to enter the lock opening. This
may cause damage to the inside of the
lock and prevent the seatback from
being locked securely.

WARNING

If you need to carry cargo in the pas-
senger compartment with the rear
seat back folded forward, be sure to
secure the cargo or it may be thrown
about, causing injury. Never pile
cargo higher than the seatbacks.

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments