manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 269 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 269

8-6

EMERGENCY SERVICE

64MS0-74E

3) Make jump lead connections as follows:

1. Connect one end of the first jump

lead to the positive (+) terminal of the
flat battery (1).

2. Connect the other end to the positive

(+) terminal of the booster battery (2).

3. Connect one end of the second jump

lead to the negative (–) terminal of the
booster battery (2).

4. Make the final connection to an

unpainted, heavy metal part (i.e.
engine mount bracket (3)) of the
engine of the vehicle with the flat bat-
tery (1).

4) If the booster battery you are using is fit-

ted to another vehicle, start the engine of
the vehicle with the booster battery. Run
the engine at moderate speed.

5) Start the engine of the vehicle with the

flat battery.

6) Remove the jump leads in the exact

reverse order in which you connected
them.

Towing

If you need to have your vehicle towed,
contact a professional service. Your dealer
can provide you with detailed towing
instructions.

2-Wheel Drive (2WD) Manual Tran-
saxle

Manual transaxle vehicles may be towed
using either of the following methods.

1) From the front, with the front wheels

lifted and the rear wheels on the ground.
Before towing, make sure that the park-
ing brake is released.

2) From the rear, with the rear wheels lifted

and the front wheels on the ground, pro-
vided the steering and drivetrain are in
operational condition. Before towing,
make sure that transaxle is in neutral,
the steering wheel is unlocked (vehicle
without keyless push start system - the
ignition key should be in the “ACC” posi-
tion) (vehicle with keyless push start sys-
tem - the ignition mode is ACC), and the
steering wheel is secured with a clamp-
ing device designed for towing service.

WARNING

Never connect the jump lead directly
to the negative (–) terminal of the dis-
charged battery, or an explosion may
occur.

CAUTION

Connect the jump lead to the engine
mount bracket securely. If the jump
lead disconnects from the engine
mount bracket because of vibration at
the start of the engine, the jump lead
could be caught in the drive belts.

NOTICE

Observe the following instructions
when towing your vehicle.
• To help avoid damage to your vehi-

cle during towing, proper equipment
and towing procedures must be
used.

• Using the frame hook, tow your

vehicle on paved roads for short dis-
tances at low speed.

NOTICE

The steering column is not strong
enough to withstand shocks transmit-
ted from the front wheels during tow-
ing. Always unlock the steering wheel
before towing.

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments