manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 252 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 252

7-25

INSPECTION AND MAINTENANCE

64MS0-74E

61MM0B078

(3) Removal
(4) Install

2) To remove the bulb of the front turn sig-

nal light (1) from the bulb holder, push
in the bulb and turn it counterclockwise.
To install a new bulb, push it in and turn
it clockwise.
To remove and install the bulb of the
front position light (2), simply pull out or
push in the bulb.

Vehicle with the LED headlights

64MM07023

To replace the bulb of the front turn signal
light (1), follow the procedure for the front
turn signal light bulb replacement of the
vehicle with the halogen headlights.

NOTE:
Position function in LED headlights is LED
type, which is non replaceable.

Front Fog Light (if equipped)

1) Start the engine. Turn the steering

wheel to rotate the tires to the opposite
side of the fog light that requires
replacement. Then turn off the engine.

64MM07016

2) Remove the screws (1).

(2)

(1)

(3)

(4)

EXAMPLE

(1)

EXAMPLE

(1)

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments