manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 114 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 114

3-15

OPERATING YOUR VEHICLE

64MS0-74E

Downshifting maximum allowable speeds

*NOTE:
You may not accelerate to the maximum
allowable speed because of the driving sit-
uation and/or the vehicle condition.

SHVS (Smart Hybrid Vehicle 
by Suzuki)

SHVS has an Integrated Starter Generator
(ISG) instead of conventional generator to
get a better fuel consumption.

Integrated Starter Generator (ISG) is a gen-
erator which incorporated a motor function.

The ISG has the following 3 functions.
• Deceleration energy regenerating func-

tion

• Engine power assist function
• Starter motor function

Deceleration Energy Regenerating 
Function

While decelerating your vehicle, the ISG
generates electricity without engine power.
This reduces engine loads and improves
fuel consumption.

While decelerating your vehicle, decelera-
tion energy regenerating function will be
activated when the following conditions are
satisfied.
• Gearshift lever is not in “N” (Neutral).
• Clutch pedal is not depressed.

NOTE:
The deceleration energy regenerating func-
tion may not work depending on vehicle
conditions.

Downshifting

km/h

2nd to 1st 

15

3rd to 2nd

70

4th to 3rd

115

5th to 4th

165

NOTICE

Do not downshift to a lower gear at
the speed faster than the maximum
allowable speeds for the next lower
speed, or severe engine damage can
result.

WARNING

• Reduce your speed and downshift

to a lower gear before going down
a long or steep hill. A lower gear
will allow the engine to provide
braking. Avoid riding the brakes or
they may overheat, resulting in
brake failure.

• When driving on slippery roads,

slow down before downshifting.
Excessive and/or sudden changes
in engine speed may cause loss of
traction, which could cause you to
lose control.

NOTICE

Make sure that the vehicle is com-
pletely stationary before you shift
into reverse.

NOTICE

• To help avoid clutch damage, do

not use the clutch pedal as a foot-
rest while driving or use the clutch
to keep the vehicle stationary on a
slope. Depress the clutch fully
when shifting.

• When shifting or starting off, do not

race the engine. Racing the engine
can shorten engine life and cause
negative effect to smooth shifting.

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments