manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 120 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 120

3-21

OPERATING YOUR VEHICLE

64MS0-74E

Cruise Control

The cruise control system allows you to
maintain a steady speed without keeping
your foot on the accelerator pedal. The
controls for operating the cruise control
system are on the steering wheel.

You can use the cruise control system with
the following conditions:
• The gear position is in 3rd, 4th or 5th.
• The vehicle speed is about 40 km/h or

higher.

Cruise Control switch

61MS416

(1) “CRUISE” switch
(2) “CANCEL” switch
(3) “RES +” switch
(4) “SET –” switch

Indicator lights

64MM02011

(5) Cruise indicator light
(6) “SET” indicator light

To Set Cruising Speed

1) Turn on the cruise control system by

pushing the “CRUISE” switch (1). When
the cruise indicator light (5) comes on,
you can set cruising speed.

2) Accelerate or decelerate to the desired

speed.

3) Push the “SET –” switch (4), “SET” indi-

cator light (6) comes on or appear on
the instrument cluster. Take your foot
off the accelerator pedal and the set
speed will be maintained.

NOTE:
Established cruising speed may differ a lit-
tle from the speed meter indication
depending on the road conditions.

WARNING

To help avoid loss of vehicle control,
do not use the cruise control system
when driving in heavy traffic, on slip-
pery or winding roads, or on steep
downgrades.

(1)

(2)

(3)

(4)

EXAMPLE

(6)

(5)

EXAMPLE

WARNING

If the cruising speed is set by acci-
dent, you cannot decelerate or could
loose control of the vehicle. This
could lead to an accident, resulting in
severe injury or death.

Turn off the cruise control system
and check that the cruise indicator
light is off when the system is not in
use.

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments