MARUTI SUZUKI S-Cross, Owner'S Manual

Page: 89 / 348

2-70
BEFORE DRIVING
64MS0-74E
ON: Lights ON
LIGHT: When it is light around the light sensor (5).
DARK: When it is dark around the light sensor (5).
Lighting
switch posi-
tion
Main lights to be
operated
Ignition mode
“LOCK” (OFF) or
“ACC”
Ignition mode “ON”
LIGHT DARK LIGHT DARK
(1) OFF
Position lights,
Tail lights
– – – –
Headlights – – – –
(2) AUTO
Position lights,
Tail lights
– – – ON
Headlights – – – ON
(3)
Position lights,
Tail lights
ON ON ON ON
Headlights – – – –
(4)
Position lights,
Tail lights
ON ON ON ON
Headlights ON ON ON ON
To turn the lights on or off, twist the knob
on the end of the lever. There are four
positions:
OFF (1)
All lights are off.
AUTO (2)
This function works when it on mode has
been changed to ON by pressing the
engine switch. The headlights and position
lights are turned on and off automatically
according to the amount of outside light
detected by a sensor. They go out auto-
matically when you change the ignition
mode to “ACC” or “LOCK” (OFF) by press-
ing the engine switch.
The light sensor (5) for sensing the amount
of outside light is installed on the upper
part of the windshield. It also serves as the
rain sensor for the rain-sensing wipers.
CAUTION
If the light sensor area of the wind-
shield is covered with mud, ice, or
other similar substances, the head-
lights and position lights may be
turned on even when it is still light
outside. Before removing such sub-
stances from the windshield, always
set the wiper control lever to the
“OFF” position. If the lever is left in
the “AUTO” position, the wipers
could unexpectedly operate and
cause injury, and could also be dam-
aged.