MARUTI SUZUKI S-Cross Owner'S Manual Download Page 173 | Manualshive

Page: 173 / 348

background image

5-30

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

NOTE:
If the “AUTO” on the display blinks, there is
a problem in the heating system and/or air
conditioning system. You should have the
system inspected by an authorised Maruti
Suzuki workshop.

NOTE:
• To find the temperature at which you are

most comfortable, start with the 25°C
(75°F) setting, for example.

• If you turn the temperature selector (1)

until “HI” or “LO” appears on the display,
the climate control system will operate at
maximum heating or cooling and blower
will run at full speed.

• To avoid blowing cold air in cold weather

or hot air in hot weather, the system will
delay turning on the blower until warmed
or chilled air is available.

• If your vehicle has been left in the sun

with the windows closed, it will cool
faster if you open the windows briefly.

• Even under automatic operation, you

can set individual selectors to the man-
ual mode. The manually selected func-
tions are maintained, and the other
functions remain under automatic opera-
tion.

• If the windshield and/or the front door

windows are fogged, push the defrost
switch (5) to turn on the defroster, or
push the “MODE” switch (4) to change
the air flow to the HEAT & DEFROST
position to defog the windows.

• To return the blower speed selector (2),

air intake selector (3), and air flow selec-
tor (4) to automatic operation, push the
“AUTO” switch (8).

64MS149

Be careful not to cover the interior tem-
perature sensor (10) located between the
steering wheel and the climate control
panel, or the solar sensor (11) located at
the top of the central part of the dash-
board. These sensors are used by the
automatic system to regulate temperature.

Manual operation

You can manually control the climate con-
trol system. Set the selectors to the
desired positions.

64MS091

NOTE:
If you need maximum defrosting:
• push the DEFROST switch to turn on the

defroster (the air conditioning system will
come on and the FRESH AIR mode will
be selected automatically),

• set the blower speed selector to HIGH,
• adjust the temperature selector to the

“HI” indication on the display, and

• adjust the side outlets so the air blows

on the side windows.

(11)

(10)

EXAMPLE

EXAMPLE

«
...
171
172
173
174
175
...
»

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments

Related manuals for S-Cross

Brand: Hama Pages: 2

Brand: Abarth Pages: 36

Brand: Chevrolet Pages: 356

Brand: Ford Pages: 272

Brand: Pontiac Pages: 376

Brand: Jeep Pages: 712

Brand: Alpine Pages: 2

Brand: Whispbar Pages: 15

Brand: Doug Thorley Headers Pages: 5

Brand: Edelbrock Pages: 2

Brand: U & Me Brothers Pages: 6

Brand: Metra Electronics Pages: 8

Brand: Unex Pages: 30

Brand: ConWys AG Pages: 16

Brand: Aries Pages: 3

Brand: Lund Pages: 12

Brand: Tactik Pages: 4

Brand: banks Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands