manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 109 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 109

3-10

OPERATING YOUR VEHICLE

64MS0-74E

Pedal

80J2121

Clutch Pedal (1)

The clutch pedal is used to disengage the
drive to the wheels when starting the
engine, stopping, or shifting the gearshift
lever. Depressing the pedal disengages the
clutch.

Brake Pedal (2)

Your vehicle is equipped with either front
and rear disc brakes or front disc brakes
and rear drum brakes. Depressing the
brake pedal applies both sets of brakes.

You may hear occasional brake squeal
when you apply the brakes. This is a nor-

mal condition caused by environmental
factors such as cold, wet, snow, etc.

Accelerator Pedal (3)

This pedal controls the speed of the
engine. Depressing the accelerator pedal
increases power output and speed.

Starting the Engine 
(Vehicle without Keyless Push 
Start System)

Before Starting the Engine

64MM03002

1) Make sure the parking brake is set fully.
2) Shift into “N” (Neutral) and depress the

clutch pedal all the way to the floor. Hold
the clutch pedal while starting the
engine. 

WARNING

Do not drive with your foot resting on
the clutch pedal. It could result in
excessive clutch wear, clutch damage,
or unexpected loss of engine braking.

(2)

(1)

(3)

EXAMPLE

WARNING

If brake squeal is excessive and
occurs each time the brakes are
applied, you should have the brakes
checked by your authorised Maruti
Suzuki workshop.

WARNING

Do not ride the brakes by applying
them continuously or resting your
foot on the pedal. This will result in
overheating of the brakes which
could cause unpredictable braking
action, longer stopping distances, or
permanent brake damage.

WARNING

• Make sure that the parking brake is

set fully and the transaxle is in
Neutral before attempting to start
the engine.

• Engine can be started only after

depressing the clutch pedal. How-
ever, before depressing the clutch
pedal make sure that the transaxle
is in Neutral and brake pedal is
depressed. 

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments