manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 84 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 84

2-65

BEFORE DRIVING

64MS0-74E

Electric Power Steering Light 

79J039

This light comes on when the ignition
switch is turned to the “ON” position or the
engine switch is pressed to change the
ignition mode to “ON”, and goes out when
the engine is started.

If this light comes on while driving, the
power steering system may not work prop-
erly. Have the system inspected by your
authorised Maruti Suzuki workshop.

NOTE:
While parking or driving at very low speed
greater steering effort is required. This is
not a malfunction of the steering system
but power steering control system limiting
power assist in order to prevent it from
over heating. 
• The steering wheel is operated very

often.

• The steering wheel is kept in a fully

turned position for a long while. 

When the power steering control system
cools down, the power steering system is
restored back to the original condition.

However, repeating these operations could
cause damage to the power steering sys-
tem.

NOTE:
If the power steering system does not work
properly, you will feel heavier to steer but
you still will be able to steer.

NOTE:
If the steering is operated, you may hear a
noise. This is normal and indicates that the
power steering system works properly.

Cruise Indicator Light (if equipped)

64MM02015

When the cruise control system is on, this
light will be on.

“SET” Indicator Light (if equipped)

65D474

When a cruising speed of the cruise con-
trol is set, this light will be on.

Turn Signal Indicators

50G055

When you turn on the left or right turn sig-
nals, the corresponding green arrow on the
instrument panel will flash along with the
respective turn signal lights. When you
turn on the hazard warning switch, both
arrows will flash along with all of the turn
signal lights.

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments