MARUTI SUZUKI S-Cross Owner'S Manual Download Page 189

Page: 189 / 348

5-46

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

What is AAC?

• An abbreviation of “Advanced Audio

Coding,” AAC is an audio compression
format used by MPEG2 and MPEG4.

Points to remember when making MP3/
WMA/AAC files

Common
• High bit rate and high sampling fre-

quency are recommended for high qual-
ity sounds.

• Selecting VBR (Variable Bit Rate) is not

recommended. Selecting VBR may
cause display of incorrect playing time
and jumpiness of playback.

• Playback sound quality varies depend-

ing on the encoding environment. For
details, refer to the user manual of the
encoding software and the writing soft-
ware in use.

Recording MP3/WMA/AAC files on a CD
media

• It is recommended not to write both CD-

DA files and MP3/WMA/AAC files on a
disc.

• If both CD-DA files and MP3/WMA/AAC

files are on the same disc, tracks may
not be played in the correct order or
some tracks may not be played at all.

• When storing both MP3 data and WMA

data on the same disc, sort and place
them in different folders.

• Do not write files other than MP3/WMA/

AAC files and unnecessary folders on a
disc.

• MP3/WMA/AAC files should be named

to meet the standards and the file sys-
tem specifications as shown below.

• The file extension “.mp3”, “.wma” or

“.m4a” should be assigned to files based
on their format independently.

• You may encounter a trouble in playing

MP3/WMA/AAC files or displaying infor-
mation of MP3/WMA/AAC files depend-
ing on the writing software or CD
recorder in use.

• This unit does not have a play list func-

tion.

• It is recommended to write discs in Disc-

at-Once mode even though Multi-ses-
sion mode is supported.

Compression formats

MP3
• Bit rate:

MPEG1 Audio Layer III: 32 k - 320 kbps
MPEG2 Audio Layer III: 8 k - 160 kbps
MPEG2.5 Audio Layer III: 8 k - 160 kbps

• Sampling frequency:

MPEG1 Audio Layer III: 32 k/44.1 k/
48 kHz
MPEG2 Audio Layer III: 16 k/22.05 k/
24 kHz
MPEG2.5 Audio Layer III: 8 k/11.025 k/
12 kHz

WMA (Ver. 7, Ver. 8, Ver. 9*)
• Bit rate: CBR 32 k - 320 kbps
• Sampling frequency: 32 k/44.1 k/48 kHz
* WMA 9 Professional/LossLess/Voice are

not supported.

AAC*
• Bit rate: ABR 16k - 320 kbbs
• Sampling frequency: 32 k/44.1 k/48 kHz
* Apple Lossless is not supported.

Supported file systems

ISO 9660 Level 1/Level 2, Joliet, Romeo

Maximum number of files/folders

• Maximum number of files: 512

(files + folders)

• Maximum number of files in a folder: 255
• Maximum depth of tree structure: 8
• Maximum number of folders: 255

(Root folder is included.)

NOTICE

Never assign the “.mp3”, “.wma”, or
“.m4a” file name extension to a file if
it is not in the MP3/WMA/AAC format
file. Failure to observe this may result
in damage to the speaker due to
noise production.

Summary of Contents for S-Cross





























































































































































































































































































































































Search results

Summary of Contents for S-Cross

Reviews:

Related manuals for S-Cross

Brands by name

Popular brands

MARUTI SUZUKI S-Cross, Owner'S Manual

Search results

Summary of Contents for S-Cross

Reviews:

Related manuals for S-Cross

Brands by name

Popular brands