manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 160 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 160

5-17

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

• Check periodically to make sure the roof

rack is securely installed and free from
damage.

• For vehicles with roof rack anchors,

make sure the anchors are covered with
the caps when not in use.

Frame Hooks 

It is not recommended to use the frame
hooks for towing another vehicle. Your
vehicle was originally designed to be
towed on the road in case of emergency
towing. If your vehicle needs to be towed in
an emergency, refer to “Towing” in “EMER-
GENCY SERVICE” section.

Front

64MM05006

The towing hook (1) is provided on the
front of the vehicle for use in emergency
situations only.

To install the hook (1), follow the procedure
below.

56RM05011

WARNING

• Abrupt maneuvers or failure to

properly secure cargo can allow
the cargo to fly off the vehicle and
hit others, causing personal injury
or property damage.

• Mount cargo securely and avoid

abrupt maneuvers such as jackrab-
bit starts, sharp turns, fast corner-
ing and sudden braking. Check
periodically to make sure that
cargo is securely fastened.

• Large, bulky, long, or flat items can

affect vehicle aerodynamics or be
caught by the wind, and can reduce
vehicle control resulting in an acci-
dent and personal injury. Drive cau-
tiously at a safely reduced speed
when carrying this type of cargo.

WARNING

Observe the following instructions
when using frame hooks. The towing
hook or vehicle body may break and
cause serious injury or damage.
• Do not use the frame hooks for

towing another vehicle.

• Avoid pulling the vehicle to get out

of severe snowy, muddy or sandy
conditions, sudden starts or erratic
driving maneuvers which could
cause excessive stress on the tow-
ing hook.

In such case, we recommend that
you contact a professional service.

(1)

EXAMPLE

（

1

）

（

A

）

（

B

）

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments