manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual

The MARUTI SUZUKI S-Cross is a versatile and stylish crossover vehicle that combines power, comfort, and durability. Enhance your driving experience by accessing the user manual, available for free download on our website. Find all the necessary information to fully enjoy your S-Cross at manualshive.com.

Share
Download
background image

2-51

BEFORE DRIVING

64MS0-74E

ing range will be shown after driving for a
period of time.

Average Speed

If you selected average speed the last time
you drove the vehicle, the display indicates
the last value of average speed from
previous driving when the ignition switch is
turned to the “ON” position or the engine
switch is pressed to change the ignition
mode to “ON”. Unless you reset the value
of average speed, the display indicates the
value of average speed which includes
average speed during previous driving.

To reset the value of average speed, push
and hold the indicator selector knob (2) for
about 2 seconds when the display indicates
an average speed. The display shows “---”
and then indicates a new average speed
after driving for a short time.

NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the value of average
speed will be shown after driving for a
period of time.

Trip Meter

The display (D) shows the trip meter.

The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use the trip meter A or trip meter B
independently.

To reset the trip meter to zero, push and
hold the trip meter selector knob (3) for

about 2 seconds when the display shows
the trip meter.

Odometer

The display (E) shows the odometer.

The odometer records the total distance
the vehicle has been driven.

Gear shift Indicator

The display (F) show th gearshift indicator.

Refer to “Gearshift Indicator” in the
“OPERATING YOUR VEHICLE” section.

Setting Mode

When the ignition switch is in the “ON”
position or the ignition mode is “ON” and
the vehicle is stationary, you can enter the
setting mode of the information display by
pushing and holding the indicator selector
knob (2) for more than 3 seconds.

• To select the setting that you want to

change, turn the indicator selector knob
(2) left or right.

• To change the setting, push the indicator

selector knob (2).

• To exit the setting mode, select “Back”

and push the indicator selector knob (2).

61MM0A161

NOTE:
The currently selected setting item is indi-
cated enclosed by a frame.

NOTE:
• If you push and hold the indicator selec-

tor knob (2) to enter the setting mode
when the display (D) shows average fuel
consumption or average speed, the
value will be reset simultaneously. If you
do not want to reset the value, push the
indicator selector knob quickly to switch
the indication of the display.

• If you turn the ignition switch, press the

engine switch or start to move the vehi-
cle when the display is in the setting
mode, the setting mode will be canceled
automatically.

NOTICE

Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments

Related manuals for S-Cross

Acdeos AXS FL Installation Instruction preview
AXS FL
Brand: Acdeos Pages: 7
TBC DPI1K User Manual preview
DPI1K
Brand: TBC Pages: 12
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
Nav TV W204PGM Operation Instructions preview
W204PGM
Brand: Nav TV Pages: 3
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
WABCO Truck Training Model Operating Instructions Manual preview
Truck Training Model
Brand: WABCO Pages: 56
Pet Gear TRI-FOLD PG9300RF Instruction Manual preview
TRI-FOLD PG9300RF
Brand: Pet Gear Pages: 4
Cadillac 54-6219 1954 Shop Manual preview
54-6219 1954
Brand: Cadillac Pages: 409
Fortin THAR-AUD1 Manual preview
THAR-AUD1
Brand: Fortin Pages: 9
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
PEUGEOT BOXER 2018 Handbook preview
BOXER 2018
Brand: PEUGEOT Pages: 232
Poison Spyder TrailGate TJ Installation Instructions preview
TrailGate TJ
Brand: Poison Spyder Pages: 5
Honda 2010 Accord Coupe Owner'S Manual preview
2010 Accord Coupe
Brand: Honda Pages: 410
Edelbrock 3824 Installation Instructions preview
3824
Brand: Edelbrock Pages: 2
Vauxhall Insignia 2009 Owner'S Manual preview
Insignia 2009
Brand: Vauxhall Pages: 253

Brands by name

Popular brands

Load more brands