manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 100 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 100

3-1

OPERATING YOUR VEHICLE

64MS0-74E

Exhaust Gas Warning

64MM03007

Daily Inspection Checklist

Before Driving

64MM03006

1) Make sure that windows, mirrors, lights

and reflectors are clean and unob-
structed.

2) Visually check the tires for the following

points:

– the depth of the tread groove
– abnormal wear, cracks and damage
– loose wheel nuts
– existence of foreign material such as

nails, stones, etc.

Refer to “Tires” in “INSPECTION AND
MAINTENANCE” section for details.
3) Look for fluid and oil leaks.

NOTE:
It is normal for water to drip from the air
conditioning system after use.

4) Make sure the hood is fully closed and

latched.

WARNING

Avoid breathing exhaust gases
Exhaust gases contain carbon monox-
ide, a potentially lethal gas that is col-
orless and odorless. Since carbon
monoxide is difficult to detect by
itself, be sure to take the following
precautions to help prevent carbon
monoxide from entering your vehicle.
• Do not leave the engine running in

garages or other confined areas.

• Do not park with the engine running

for a long period of time, even in an
open area. If it is necessary to sit for
a short time in a parked vehicle with
the engine running, make sure the
air intake selector is set to the fresh
air position and the blower is at high
speed. 

(Continued)

EXAMPLE

WARNING

(Continued)

• Avoid operating the vehicle with

the tailgate or trunk open. If it is
necessary to operate the vehicle 

• with the tailgate or trunk open,

make sure all windows are closed,
and the blower is at high speed
with the air intake selector set to
the fresh air position.

• To allow proper operation of your

vehicle’s ventilation system, keep
the air inlet grille in front of the
windshield clear of snow, leaves or
other obstructions at all times. 

• Keep the exhaust tailpipe area clear

of snow and other material to help
reduce the buildup of exhaust
gases under the vehicle. This is
particularly important when parked
in blizzard conditions. 

• Have the exhaust system inspected

periodically for damage and leaks.
Any damage or leaks should be
repaired immediately.

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments