manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 37 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 37

2-18

BEFORE DRIVING

64MS0-74E

Mirrors

Inside Rearview Mirror

68LMT0205

68LMT0206

(2) Day driving
(3) Night driving

You can adjust the inside rearview mirror
by hand so as to see the rear of your vehi-
cle in the mirror. To adjust the mirror, set
the selector tab (1) to the day position,
then move the mirror up, down or sideways
by hand to obtain the best view.

When driving at night, you can move the
selector tab to the night position to reduce
glare from the headlights of vehicles
behind you.

Auto Dimming Rearview Mirror 
(if equipped)

57L30019

You can adjust the auto dimming rearview
mirror by hand so you can see to the rear
of your vehicle in the mirror. This rearview
mirror has a function of automatically
reducing glare from the lights of vehicles
behind you. The function works when the
ignition mode has been changed to “ON”
by pressing the engine switch.
• The mirror is always set to the automatic

dimming mode when the engine switch
is in the “ON” mode. 

• When the “AUTO” switch (2) is pushed,

the green indicator (1) is lit, indicating
that the mirror is set to the automatic
dimming mode. To cancel the automatic
dimming mode, push the “AUTO” switch
(2); the indicator (1) then goes out.

• The auto dimming rearview mirror is

automatically deactivated while the gear-
shift lever is in the “R” position.

EXAMPLE

(1)

(2)

(3)

EXAMPLE

WARNING

• Always adjust the mirror with the

selector set to the day position.

• Only use the night position if it is

necessary to reduce glare from the
headlights of vehicles behind you.
Be aware that in this position you
may not be able to see some
objects that could be seen in the
day position.

(2)

(1)

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments